Public Office Atomizer Sterilizer

Disinfection Machine CTP-102A

 

Atomizer Sterilizer Disinfection Machine

Sanitizing Disinfectant Machine helps you to sanitize your home, office, car etc. easily anytime.

This disinfection spray machine uses steam free drying smoke to disinfect.

Disinfectant Sanitizer Smoke Spray also known as Atomization Disinfectant spray machine can help protect your family from illness by helping prevent the spread of harmful bacteria and viruses.

This product kills bacteria on both hard and soft surfaces, plus it fragrances the air.

 
 
 

Instructions for use:

The indoor atomization and anti-bacterial machine (atomization machine) connected to 220V power supply, open the warm-up for 3 minutes, to be the handle button light,said atomization machine can work.

Handle operation: press the handle to the button button, atomization machine work; release the handle button, atomization machine to stop working.

Working principle:

Indoor atomization and antimicrobial (atomization machine)

The use of non-steam dry smoke to disinfect the ingredients to the car has a smell of the part.

Which play a decomposition of odor, sterilization deodorant effect. And with a scent to purify the air.

Automatically smoke, the bike to purify the smoke 5-8 minutes, and then open the car within 10 minutes after the smoke adsorption is completed, and then open the door to feel healthy and fresh air.

Spraying antibacterial disinfection machine steps:

Step 1 : start the car, the car is inside the cycle, the wind speed is 3 files, and the cold air is opened.

Power on the machine into the front passenger seat row and open the red switch button on the back of the machine.

Step 2: Wait for 5 minutes for preheating, wait until the handle light is on. Then press the timer switch (4 ml to 100 ml of potion. Please set 4 or more below 80 ml.)

The third step: atomization for about 3 to 5 minutes, the liquid medicine is sprayed off the machine, take out the machine, continue the inner circulation for about 15 minutes, let it fully absorb.

The fourth step: ventilate, cycle outside for 3 minutes, the entire construction is completed, check the switch off and deliver.

Tips:

After the machine is finished, it is best to use a clear water spray.

Keep the machine piping clean and unobstructed to prevent blockages from affecting machine operation.

Cleaning function:

Connect the machine to the power supply, press the black switch to the left cleaning position, turn the timing knob to about 2 steps, and rinse the machine pipe with clean water or clean tap water.

technical information

  • Smoke Output:
  • Tank Capacity:
  • Power:
  • Control:
  • Fuel Consumption Rate:
  • Output Distance:
  • Certification
  • Re-Heating Time
  • Output Time
  • Warm up Time
  • Voltage
  • Consumables
  • Cover Area
  • Specification
  • 20000cuff/min
  • 1.5L
  • 900W
  • Remote /Wire/Time/Automatic Control
  • 9 mins/Liter
  • 1-5m
  • RoHS, CE
  • 5 Min
  • 20s
  • 5mins
  • AC110~240V 50/60Hz
  • Disinfectant Liquid
  • 200m2
  • 320x310x185mm